Language:  ENGLISH  |  FRANÇAIS  |  ESPAÑOL
About Aquatica     Products     Accessories     Technical Lighting Control     Sales & Service      Gallery     Contact

Products: Still Camera Housings
Aquatica 7D Mk II

  • Description

  • Image
    Gallery
  • Ports

  • Extensions

  • Related
    Products
  • Lens
    Chart
  • System
    Chart
  • User
    Guide

Five years since its introduction, the venerable and cutting-edge Canon 7D finally gets a facelift, and what a face lift it is!
Much like it did with the initial 7D, Canon implemented autofocus technology usually reserved to its pro level cameras. The 7D Mk II picks up the strength of its predecessor and improves on them.

In its role as a still camera, the 7D Mk II benefits from a 65 points, all cross-type, AF module and a 150,000 Pixels RGB+IR metering sensor, giving it the iTR (intelligent Tracking & recognition) capability of the flag ship Canon EOS 1Dx, using this technology, the camera can determine automatically which AF point is needed to properly maintain focus on the subject selected initially.
With an upward boost of 10 frames per second, again a feature found on pro level cameras, the shutter is designed to go beyond the 200,000 actuations.

The 20MP sensor is of the same generation as the ground breaking 70D, so focusing in video is vastly improved in this area, and also pertaining to video is the addition of 1080p/60 shooting and the possibility to choose between .MOV and .MP4.

About the Aquatica A7D Mk II housing:

The Aquatica A7D Mk II is the only aluminum housing with built in TTL capability for Ikelite strobes, it combines the fine craftsmanship of our housings with the impressive knowledge in strobe technology from Ikelite. If the subject exposure requires it, the exposure correction dial for the strobe, which is conveniently located on the rear, close to one’s right hand, makes easy work of tweaking exposure, simply by rotating the knob with one’s thumb, even switching the strobes to full manual and controlling their power output can be done from this control.

Aquatica A7D Mk II housing for the Canon 7D Mk II are available with the following strobe connections

20077-NK
20077-OPT
20077-HYB
20077-KM
20077-KTTL
A7D Mk II with dual Nikonos strobe connector
A7D Mk II with dual optical fiber ports (for Sea & Sea and Inon type)  
A7D Mk II with 1x Nikonos type connector and 1x optical fiber port
A7D Mk II with Ikelite manual bulkhead
A7D Mk II with internal Ikelite TTL circuitry and strobe connector

Building up on the initial ground breaking Aquatica A7D housing, the A7D Mk II version keep all aspect of what made this housing one of the best ever made. But with newer improved ergonomics, with a versatile port system, a rugged, yet compact design, this housing is built to bring back images in all kinds of aquatic environments.

The shell is made of top grade aluminum and stainless steel controls, both being the same alloys as used in the aeronautical industry. Precision machined from solid stock, anodized to stringent norms and powder coated for added protection, our housing are known to routinely go beyond 3,000 hours in salt water, and are the brand used and recommended on the two largest fleets of live aboard boats in the world.

Access to the camera controls is complete, with special attention been given to the controls of the video features, for which a smooth operation is always crucial when shooting video footage. Knobs are large sized, giving the user a better and smoother feel when working with cold water gloves, depth rated to 300ft/90m and up to 425ft/130m (free of charge) on request.

An aquatica A7D Mk II is not just a housing, it’s the key to a comprehensive system, one which includes optical ports, designed and manufactured by Aquatica, which is the only sure way to get the precision and quality that the Canon 7D Mk II and its lenses would appreciate. A wide range of port extensions, enhanced view finders, lens gears, remote triggering device, hydrophones, vacuum monitoring system and to the longest established strobe arm system, Technical Lighting Control.

Made in Canada, and designed from the onset to work in this country’s demanding diving conditions, the Aquatica A7D Mk II joins the rank of a lineup of legendary housings which have helped define modern underwater photography as we know it today.

All in all the A7D Mk II housing is well balanced underwater, even all kitted up for actual diving conditions with modeling light and dual strobes , the A7D Mk II is easy to operate, with the housing vital mechanical controls accessible at all time. The right hand business side has controls over the strobe exposure compensation control knob, AF-ON and star (*) lever, ISO lever, aperture and shutter speed knobs, and the multi control array, buttons, all without having to remove one’s hand from the grips. The left hand side reaches the Zoom/focus control, the Menu, INFO, playback and other buttons.

The new rotating latch system and clamp shell adds another safety level to this housing, the redesigned camera tray provides a precise and smooth insertion into the housing. The port lock, shutter release have been revamped and a host of new features have been implemented in the Aquatica A7D Mk II housing.

In conclusion, this housing is not only bursting with innovative features, it also give the underwater photographer, due to Aquatica’s exclusive access to Ikelite TTL strobe technology, a huge lighting advantage, by eliminating much of the guess work associated with manual strobe exposure.


20054
Aquatica Aqua View 180 Finder

Click here for complete product information.

 

20059
Aquatica Aqua View 45 Finder

Click here for complete product information.

19305
Underwater remote trigger for Canon 1Ds Mk III, 1D Mk IV, 5D Mk II, 5D Mk III & 7D (extra bulkhead included)

  19220
Replacement anodes (two complete set) for all Aquatica digital housing

* except D2x housing
18854
Maintenance kit for Aquatica Canon 7D Mk II Housings.

Click here
for more information.
  18789
Protective body cap: for all Aquatica bayonet style housing
18472
Neoprene Light Blocking Mask
     

19230 Grip extenders

These easy to install will give you additional space should your housing feel cramped for your hands, or if wearing cold water gloves, adding one spacer will give an extra 10mm/.0.375” of clearance, adding both will expand this to 20mm/0.75”, these extenders are ideal for adapting the housing to your own personal handling preference.

19217: Conversion spring kit for deeper rating (425ft / 130m)
*Please read notice

This deeper rating spring kit requires that the O-rings of the housing be removed and reinstalled, since the sealing integrity of the housing comes into play in doing so, Aquatica recommends that this modification be done only by qualified technician from and authorized Aquatica service center, also please note that this kit can also be factory installed as an option when ordering a housing.

19228: SURVEYOR pressure valve and vacuum pump (Ø 0.50”):

For converting a current Aquatica housing with an access hole diameter of Ø 0.50” which is already equipped with a (# 19229) SURVEYOR moisture and vacuum sensor circuit board. The addition of this pressure valve and vacuum pump will add vacuum monitoring capability to the Aquatica housing.

IMPORTANT NOTE:
For installation of this pressure valve, the housing will requires a bulkhead entry point hole with a diameter of Ø 0.50”. Prior to ordering, the dimension of the access hole of your Aquatica housing model should be confirmed.

Included with this kit are the following items:

Pressure valve with retaining nut (Ø 0.50”)
Vacuum pump
Container of O-ring lubricant
Instruction sheet